Calibration

    We can supply you with our measuring equipment with the latest calibration certificate.

    All measuring equipment marked in accordance with DIN and offered in this catalog can be calibrated according to the valid regulations of VDI / VDE / DGQ2618. Measuring equipment manufactured according to the company standard can only be calibrated according to the specified company standards.

    The calibration is carried out by an external calibration laboratory of our choice.

    The delivery time for an item with external calibration is approximately one week.

    Orders with calibration cannot be canceled, goods with a calibration certificate are also excluded from the right of return.
    If you have the calibration carried out by another calibration laboratory, we accept no liability in the event that the measuring equipment fails the calibration for any reason. Damages and costs are therefore excluded.

    No discount or discount is granted for the calibrations!

    category 1
    test specificationrange mmOrder.- No.Euro / Pc. NETTO
    Caliper, workshop-
    and special calipers, analog u. digital
    VDI / VDE / DGQ 2618    		until 150
    until 300
    until 500
    		70000100
    70000102
    70000103    		7,50
    12,50
    16,50
    3-point caliper and 5-point caliper, analog u. digital VDI / VDE / DGQ 2618
    		until 75
    		70000107
    		15,00
    category 2
    test specificationrange mmOrder.-NoEuro/Pc. NETTO
    Calipers, workshop calipers, special calipers, analog and. digital VDI / VDE / DGQ 2618 until 300
    until 500
    until 1000
     until 2000
    until 3000
    		70000102
    70000103
    70000104
    70000105
    70000106
    		12,50
    16,50
    21,00
    47,50
    82,00
    category 3
    test specificationrange mmOrder.-No.Euro/Pc. NETTO
    Depth calipers, scale analog u. digital VDI / VDE / DGQ 2618bis  150
    bis 300
    bis 500
    bis 1000
    		70000113
    70000118
    70000112
    70000114
    		7,50
    14,00
    15,00
    20,00
    category 4
    test specificationrange mmOrder.-No.Euro/Pc. NETTO
    Outside micrometers DIN 863/1 (test without setting standard) analogue and digital VDI / VDE / DGQ 2618until 25
    until 100
    until 200
    until 300
    until 400
    until 600
    until 1000
    until 1200    		70000241
    70000242
    70000243
    70000244
    70000245
    70000261
    70000262
    70000263    		14,50
    16,00
    20,00
    22,50
    24,00
    40,00
    50,00
    62,50
    Outside micrometer setting standard according to DIN 863, tolerance field Js2 2618 4.4until 100
    until 300
    until 500
    until 1000
    		70000251
    70000253
    70000254
    70000256    		7,50
    10,00
    14,00
    24,00
    Measuring robs for outside micrometersuntil 50
    until 100
    until 500    		70000267
    70000268
    70000264    		8,50
    10,00
    14,00
    Measuring tips DIN 863/3all7000027014,00
    Setting standard for thread micrometer, DIN 863until 100
    until 200    		70000272
    70000273    		31,50
    46,50
    Micrometer head VDI/VDE/DGQ 2618all7000028121,50
    Depth micrometer DIN 863until 25
    		7000028220,00
    Depth micrometer extensions
    		until 100
    until 200
    until 300    		70000283
    70000284
    70000274    		7,50
    10,00
    12,50
    Inside micrometer (two-point)until 200
    until 1000
    		70000201
    70000202    		19,00
    31,50
    Inside micrometer (double leg)until 557000020344,00
    Inside micrometer (top-point with jaws) without setting standarduntil 50
    until 75
    until 100
    until 300    		70000204
    70000211
    70000212
    70000213    		22,50
    26,50
    30,00
    44,00
    Three-point internal micrometer without setting standard, without extension, digital and. analogueuntil 20
    until 50
    until 100
    until 150
    until 200
    until 250
    until 300    		70000220
    70000221
    70000222
    70000223
    70000224
    70000225
    70000226    		20,00
    25,00
    28,00
    32,50
    37,50
    40,00
    45,00
    Indicating snap micrometer without setting standarduntil 25
    until 100    		70000235
    70000236    		25,00
    31,50
    category 6
    test specificationrange mmOrder.-No.Euro/Pc. NETTO
    Dial indicator, analogue, reading 0,01 mm VDI / VDE / DGQ 2618, page 11until 10
    until 30
    until 50    		70000401
    70000402
    70000403    		13,50
    20,00
    24,00
    Dial indicator, analogue, reading 0,001 mm VDI / VDE / DGQ 2618, page 111
    5    		70000414
    70000415    		15,00
    19,00
    Dial indicator, digital, VDI / VDE / DGQ 2618, page 11until 12,7
    until 25,4
    until 50
    		70000416
    70000417
    70000418    		18,50
    21,50
    25,00
    Universal test indicator (Pupitast), VDI / VDE / DGQ 2618all7000040419,00
    Internal measuring instrument (two-point) without dial indicator (extra) VDI / VDE / DGQ 2618until 60
    until 160
    until 400
    from 401    		70000405
    70000406
    70000407
    70000408    		19,00
    22,50
    29,00
    34,00
    Deal caliper gauge for inside and outside VDI / VDE / DGQ 2618 page 12.1 oder 13.1all70000410
    		16,50
    Rubrik 7
    test specificationrange mmOrder.-No.Euro/Pc. NETTO
    Control square carbon steel 90° DIN 875 VDI/VDE/DGQ 26188until 100
    until 300
    until 600
    until 1000

    		70000501
    70000502
    70000503
    70000506    		12,50
    17,00
    20,00
    38,00
    Bevel edge squares 90° DIN 875 VDI/VDE/DGQ 2618until 100
    until 300
    		70000504
    70000505    		22,00
    29,00
    Center square VDI/VDE/DGQ 2618until 250 mm7000051022,00
    category 8
    test specificationrange mmOrder.-No.Euro/Pc. NETTO
    Protractor VDI / VDE / DGQ 2618 digital or analogueall

    		7000070110,00
    Bevel protractort VDI / VDE / DGQ 2618 digital or analogueincl. additional angle7000070224,00
    Marking venier caliper VDI / VDE / DGQ 2618until 300
    until 600
    		70000703
    70000704    		19,00
    22,00
    category 9
    test specificationrange mmOrder.-No.Euro/Pc. NETTO
    Gauge block, single, steel, ceramic or hardened steel, standard
    VDI/VDE/DGQ 2618 DIN ISO 3650, DIN 861    		until 100
    until 200
    until 300
    until 400
    until 500
    until 600
    until 700
    until 800
    until 900
    until 1000

    		70000801
    70000802
    70000803
    70000804
    70000820
    70000821
    70000822
    70000823
    70000824
    70000825    		 7,00 pcs.
    16,00 pcs.
    25,00 pcs.
    34,00 pcs.
    47,00 pcs.
    59,00 pcs.
    75,00 pcs.
    97,50 pcs.
    104,00 pcs.
    115,00 pcs.
    Gange block steel, ceramic or hardened steel, standardized (price per set)
    VDI/VDE/DGQ 2618 DIN ISO 3650, DIN 861    		32 pcs.
    46 pcs.
    47 pcs.
    87 pcs.
    103 pcs.
    112 pcs.    		70000805
    70000806
    70000807
    70000808
    70000809
    70000810    		150,00 set
    200,00 set
    207,00 set
    375,00 set
    450,00 set
    500,00 set
    Pin gauge VDI/VDE/DGQ 2618all
    		70000814 4,50 pcs.
    Pin gauge (price per set) VDI/VDE/DGQ 261820 pcs.
    31 pcs.
    40 pcs.
    51 pcs.
    91 pcs.
    100 pcs.
    273 pcs.    		70000830
    70000831
    70000832
    70000833
    70000834
    70000835
    70000836    		 69,00 set
    117,00 set
    132,00 set
    169,00 set
    300,00 set
    338,00 set
    875,00 set
    category 10
    test specificationrange mmOrder.-No.Euro/pc. NETTO
    Height and marking gauge DIN 862 (analogue und digital) 0,01 VDI/VDE/DGQ 2618until 300
    until 600
    until 1000    		70000115
    70000116
    70000117    		17,00
    20,00
    47,00
    Precision spirit levels DIN 877 and DIN 2276reading 0,02 mm/m
    reading ab 0,1 mm/m    		70000120
    70000121    		53,00
    37,00
    Precision frame spirit levels
    DIN 877 and DIN 2276    		reading 0,02 mm/m
    reading ab 0,1 mm/m
    		70000122
    70000123    		57,00
    40,00
    Digital levelall70000124107,00
    category 11
    test specificationrange mmOrder.-No.Euro/pc. NETTO
    Test: DIN 6403 and EWG-Richtlinie 73/362/EWG steel rules, flexible class I/II/III300
    500
    1000
    2000
    3000
    		70000901
    70000902
    70000903
    70000904
    70000905    		4,00
    4,50
    5,00
    11,50
    25,00
    EWG-norm 73/362/EWG steel rules, strong, on the basis DIN 866 DIN 866 class I/II300
    500
    1000
    2000
    		70000906
    70000907
    70000908
    70000909
    70000910    		15,00
    21,50
    24,00
    35,00
    44,00
    Knife straight edges DIN 874 VDI/VDE/DGQ 2618 norm 2618 page 19until 300
    until 500
    until 1000
    until 1250
    until 1500
    		70000918
    70000919
    70000920    		9,00
    12,50
    22,50
    category 12
    test specificationrange mmOrder.-No.Euro/pc. NETTO
    Feeler gauges (set) DIN 2275per page700010011,90
    Screw pitch gauges (set)per page700010032,20
    Setting ring DIN 2250 und 2254 VDI/VDE/DGQ 2618 page 4.1until 50
    until 100
    until 200
    until 300    		70001012
    70001010
    70001011
    70001013    		15,00
    18,00
    19,00
    24,00
    Limit plug gauges (Go+NoGo) DIN 2245, tolerance DIN 7162 VDI/VDE/DGQ 2618 page 4.1until 20
    until 60
    until 100
    		70001016
    70001014
    70001015    		8,50
    11,00
    15,00
    Limit-thread plug gauge Go+ NoGountil M3
    until M20
    until M62    		70001020
    70001021
    70001022    		17,00
    17,50
    19,00
    Thread ring gauge Go+NoGountil M4
    until M20
    until M60
    		70001025
    70001026
    70001027    		24,00
    18,00
    19,00
    category 13
    test specificationrange mmOrder.-No.Euro/pc. NETTO
    Rolling scale made of steel or textile based on DIN 6403until 2000
    until 3000
    until 5000
    until 10.000
    until 20.000
    until 50.000    		70000911
    70000912
    70000913
    70000914
    70000915
    70000917    		8,50
    12,50
    19,00
    25,00
    31,50
    47,00

    When delivering calibrated items in an independent calibration laboratory, the delivery time is extended by about one week.

    Calibrated measuring devices cannot be canceled. Items with a calibration certificate are excluded from the right of return.